Eyepieces

There are several eyepieces that can be used for direct viewing with the telescope. They are described in the table below.

Label (see above image)	Shaft Diameter (inches)	Requires Adapter (y/n)	Manufacturer	Focal Length (mm)	FOCUS Position not AFOCUS	Notes
A	2	n	Meade	56	1767	none
B	2	n	Meade	40	1785	none
C	2	n	Meade	32	1848	none
D	2	n	??	32	??	Used ONLY for Finder Scope
E	2	is the adapter	Meade	-	-	use this for F-J
F	1.25	y	Meade	24.5	1898	none
G	1.25	y	LVW	22	1898	none
H	1.25	y	LVW	17	1935	none
I	1.25	y	Celestron	40	1784	has a red filter for Moon viewing
J	1.25	y	Meade	25	1932	illuminated reticle

Note: The focus positions are only valid if the eyepiece is fully inserted into the holder (for the 1.25" eyepieces, this means fully inserted into the adapter, which is full inserted into the eyepiece holder).

As mentioned above, the eyepiece must be fully inserted into the holder for the focus values to be accurate. To do this, loosen the thumbscrew, and slide the filter all the way in. Then retighten the thumbscrew (hand tight, but tight enough that the filter doesn't fall out). Cake.